Installation Sensors Not Triggering
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
If you are unable to get the panel to respond when you are triggering a sensor, please use the information below to resolve your issue.
YOU MUST TRIGGER YOUR SENSORS BEFORE YOU INSTALL YOUR SENSORS
YOU MUST TAP NEXT BEFORE YOU MOVE ON TO ANOTHER SENSOR
If you are going through your installation and a sensor is not triggering and you are unable to continue learning in sensors; call support. A member of our support team will walk you through exiting the installation wizard, as the wrong sensors may have been added to your panel.
I Placed my Sensors Before I Powered on the Panel
As you saw in the video, you were to plug in the panel before you place your sensors. If you placed your sensors before you powered on your panel, you can still follow the prompts of the installation; we recommend walking around to each sensor with the panel in hand to complete the installation wizard.
We do not recommend that you do this on your own, as your system will not be active in our monitoring station. However, if the panel has not prompted you to call tech support and press done, you will remain in the wizard until; you press and hold the Home and the Phone button down at the same time for three seconds.
You will need to add, install, and test all of your sensors. Then a member of our support team will NEED TO MANUALLY ACTIVATE your account; this must be done before your system is being monitored.